Description of the screen drawing options:
Drawing construction:
Indicates which parts of the construction must be drawn on the work screen:
* Junction points. If active, the nodal points are numbered, the numbers are encircled.
* Supports. If active, the supports are shown as symbols.
* Rod numbers. If active, the bar numbers are shown in the bars.
* Profile views. If active, the profiles are drawn as shown in the profile file. (See Ln1x,Ln2x etc in the profile file)
If not active the bar is shown by a line.
* Forces. If active, the vectors and force number of the forces and/or moments are drawn.
The scale of the vector may be changed under drawing scales.
* Equal Load. If active, equal loads are drawn. The scale of the vector may be changed under drawing scales.
Calculation results:
Indicates which calculation results should be shown on screen.
* Tension. If active, the tensions will be shown in colours after the calculations. The scale of which can be
compared with the table which is drawn after the calculations.
* Movement. If active, movement is shown by a yellow line on the construction. This movement can by shown
enlarged. The enlargement factor may be changed under drawing scales.
* Moment lines. The drawing of moment lines. The angle under which the lines are drawn can be changed under
Others / EMPIRE-2D Settings.
